Acquire inputs and send outputs on Arduino boards

Run models on Arduino boards.

MATLAB class and Simulink blocks for communicating with an Arduino microcontroller board

Acquire images and video from UVC compliant webcams.

Generate code optimized for C2000 MCU.

Acquire video and images from generic video capture devices.

Acquire sensor and image data from your Raspberry Pi.

Generate code optimized for STMicroelectronics STM32 Processor based boards

Prototype and test software-defined radio (SDR) systems using ADALM-PLUTO with MATLAB and Simulink

Run models on Raspberry Pi.

Acquire RF data using RTL-SDR.

Acquire and analyze data from NI-DAQmx devices.

Design SDR systems using USRP(R) Radio.

Design, simulate and deploy algorithms to fly Parrot Minidrones

Control instruments using Keysight (Agilent) VISA.

Generate code optimized for Cortex-M processors.

Run models on Arduino Due.

Access PX4 autopilot peripherals with UAV Toolbox and automatically build and deploy flight control algorithms with Embedded Coder

Custom target for Arduino and other processors

Control instruments using NI-VISA.

Acquire sensor and image data from built-in sensors on Android devices.

Acquire video and images from GenTL compliant cameras.

This package represents the MATLAB Installer add-on for the FREE of cost, NXP’s Model-Based Design Toolboxes.

Generate and deploy code for STMicroelectronics STM32 Nucleo boards

Run models on Android devices

Develop AUTOSAR software components for automotive systems.

Acquire video and images from GigE vision compliant cameras.

Design and prototype SDR systems using Xilinx Zynq-based radio

Acquire and analyze data from Measurement Computing DAQ devices

Acquire live images from IP Cameras that support MJPEG over HTTP/RTSP or H.264 over RTSP streams.

Use MATLAB Coder to generate C and C++ code for deep learning networks

dsPIC, PIC32, SAMx2, SAMx5 and SAMx7 support package

Send and receive CAN messages with PEAK-System CAN devices.

Board support package for HDL targeting and data streaming from Analog Devices transceivers.

This app allows a user to interactively configure/control their data acquisition devices.

Control instruments using Rohde & Schwarz VISA (R&SVISA)

Acquire sensor and image data from built-in sensors on iOS devices.

Control and acquire data from NI-SWITCH devices.

NVIDIA GPU Support from GPU Coder

Quantize and Compress Deep Learning models

Run models on Apple iOS devices.

Acquire and analyze data from Digilent Analog Discovery.

Generate code for the ARM portion of the Zynq-7000 SoC.

Control Parrot drones from MATLAB and acquire sensor data

Acquire video and images from Kinect for Windows Sensor.

Acquire video and images from Point Grey cameras.

Use GPU Coder to generate optimized CUDA code for deep learning networks

Generate code optimized for ARM Cortex-A processors.

Generate code for the FPGA portion of the Zynq-7000 SoC.

A set of wrapper functions to run FFmpeg directly from Matlab

Send and receive CAN messages with Vector CAN devices.

Interface with HC-SR04 ultrasonic sensors connected to Arduino hardware in MATLAB.

Debug and test HDL code on Xilinx FPGAs and Zynq SoCs.

Design, analyze, and prototype for Xilinx SoC and FPGA devices

Run models on LEGO MINDSTORMS EV3.

Control Ryze Tello drones from MATLAB and acquire sensor and image data

Prototype and test software-defined radio (SDR) systems using USRP E310 with MATLAB and Simulink

Generate code for the ARM Cortex-based VEX Microcontroller.

Acquire and analyze data from Windows sound cards.

Send and receive CAN messages with Kvaser CAN devices.